PLC accessories - ElectroSource
PLC accessories

PLC accessories

Product Attributes
Number of attributes1 gary test1
 Image   Products+   Manufacturer 
Mod,DVP01PU-S Motion control module  Mod,DVP01PU-S Motion control module

DVP01PU-S:- Positioning control unit. Supply Vdc=24V/70mA Max. number of connected axes 8 units; Speed/position control of step/servo driven system. For PLC= SS/SA/SX/SC series MPU can connect up to 8 extension modules without occupying any I/O. LED indications for all output/input signals. Built-in various route control modes. For DVP-PLC SS/SA/SC/SX series. Inputs: Isolation= Photo coupler Input point: START, STOP, LSP, LSN, DOG(contact or open collector transistor, 24VDC±10%, 5±1mA) Inputs:ΦA, ΦB(line driver or open collector transistor, 5~24VDC, 6~15mA) Input: PG0 (line driver or open collector transistor, 5~24VDC, 6~15mA) OUTPUT: Isolation:=Photo coupler The maximum output pulses can be up to 200 KPPS, Pulse output format:- Three selectable modes: Pulse/Dir, FP (CW)/RP (CCW), A/B (all modes are line driver output) Distance instruction Distance value is set by CR. 1. Setting range: -2, 147,483,648~+2,147,483,647; 2. Selectable unit: um, mdeg, 10-4inch, Pulse; 3. Selectable rate: 10x0,10x1,10x2,10x3,; 4. Selectable position: absolute and relative position instruction Speed instruction Speed value is set by CR. 1. Setting range: -2,147,483,648~+2,147,483,647 (conversion value of 10~200KPPS pulse) 2. Selectable unit: pulse/s, cm/min, 10deg/min, inch/min External output Outputs: FP and RP (line driver output 5V) Output: CLR is the type of NPN open collector transistor output (5~24VDC, less than 20mA) Position program & data transmission: Read/write - 32bit data. There are 49 CRs (Control Register) with 16-bit for each register in 01PU.

 
 Delta 
Mod,DVP02DA-S 2xOP V/mA analog module  Mod,DVP02DA-S 2xOP V/mA analog module

DVP02DA-S has 2 x analog signal outputs (+10Vdc - resolution 2.5mV) OR current(+0-20 mA - resolution is 5 µA) , Supply:20.4VDC to 28.8VDC Digital register: 12 bits. For DVP-PLC SS/SA/SX Series PLC. 16bit CR(Control Register). Firmware version update via RS485. Wiring selectable voltage or current.

 
 Delta 
Mod,DVP04AD-E2; 4x +-5V/10V/20mA inputs  Mod,DVP04AD-E2; 4x +-5V/10V/20mA inputs

The DVP04AD-E2:- 4 channel inputs +-mA/V analog inputs. Supply:20.4VDC to 28.8VDC Inputs: Voltage +-10Vdc(resolution is 5 mV/14bit) OR +-Current +-0-20mA(resolution is 20 µA/13bit) Outputs: Voltage +0-10Vdc (resolution is 2.5 mV) and current is +0mA-20mA(resolution is 5 µA). There are 49 Registers (CR, each register has 16-bit) in each module. Firmware can be updated via RS485. Select between voltage or current via wiring., LED indication, Plugin termination For PLC: ES/EX.

 
 Delta 
Mod,DVP04AD-S 4xIP V/mA analog IP module  Mod,DVP04AD-S 4xIP V/mA analog IP module

DVP04AD-S has 4 x analog signal inputs (±10Vdc - resolution 1.25mV/14bits) OR current(±20 mA - resolution is 5 µA/13bits), Supply:20.4VDC to 28.8VDC Accuracy:=±0.5% of full scale of 25DegC(77Fahr); ±1% of full scale during 0-55℃(32~131Fahr) For DVP-PLC SS/SA/SX Series PLC. There are 49 CR(Control Register, each register has 16-bit) in each module. Firmware version update via RS485. Wiring selectable voltage or current.

 
 Delta 
Mod,DVP04DA-S 4xOP V/mA analog module  Mod,DVP04DA-S 4xOP V/mA analog module

DVP04DA-S has 4 x analog signal outputs (+10Vdc - resolution 2.5mV) OR current(+0-20 mA - resolution is 5 µA) , Supply:20.4VDC to 28.8VDC Digital register: 12 bits. For DVP-PLC SS/SA/SX Series PLC. 16bit CR(Control Register). Firmware version update via RS485. Wiring selectable voltage or current.

 
 Delta 
Mod,DVP04PT-E2 4x PT100/1000 IP module  Mod,DVP04PT-E2 4x PT100/1000 IP module

DVP04PT-E2 = 4x platinum temperature sensor INPUTS(PT100 3-WIRE 100Ω3850 PPM/°C(DIN 43760 JIS C1604-1989), Ni100/1000).0-300Ohm. Supply = 24Vdc Register resolution=16-bit 49 Controlled Registers (CR, each register has 16-bit) in each module. Direct RS-485 communication or via MPU. DVP04PT-E2 displays both Centigrade and Fahrenheit. The input resolution for Centigrade is 0.1 degrees and for Fahrenheit is 0.18 degrees, LED indication, Plugin termination For PLC: ES/EX.

 
 Delta 
Mod,DVP04PT-S 4x PT100/1000 IP module  Mod,DVP04PT-S 4x PT100/1000 IP module

DVP04PT-S = 4x platinum temperature sensor INPUTS(PT100 3-WIRE 100Ω3850 PPM/°C(DIN 43760 JIS C1604-1989)). Supply = 24Vdc Register resolution=14-bit 49 Controlled Registers (CR, each register has 16-bit) in each module. Direct RS-485 communication or via MPU. DVP04PT-S displays both Centigrade and Fahrenheit. The input resolution for Centigrade is 0.1 degrees and for Fahrenheit is 0.18 degrees.

 
 Delta 
Mod,DVP04TC-E2 4x Tcouple IP module  Mod,DVP04TC-E2 4x Tcouple IP module

DVP04TC-E2:-4x J&K thermocouple inputs module. DegC and Fahrenheit, Vsupply=20.4VDC to 28.8VDC For PLC: ES/EX. Temperature Input Range J-type: -100°C~700°C K-type: -100°C~1000°C J-type: -148°F~1292°F K-type: -148°F~1832°F Digital Conversion Range J-type: K-1000~K7000 K-type: K-1000~K10000 J-type: K-3280~K12920 K-type: K-1480~K18320 Resolution = 16 bits(0.1°C) 16 bits(0.18°F) Overall Accuracy =±0.5% of full scale of 25°C(77°F), ±1% of full scale during 0~55°C(32~131°F) Response Time 250 ms ×channels No isolation between channels. Digital Data Format 2’s complement of 16-bit, (13 Significant Bits) Average Function Yes (CR#2~CR#5 may be set and the range is K1~K4096) Self Diagnostic Function = Yes Communication Mode (RS-485) MODBUS ASCII/RTU Mode. Communication baud rate of 4800 / 9600 / 19200 / 38400 / 57600 / 115200. For ASCII mode, date format is 7Bits, even, 1 stop bit (7 E 1). For RTU mode, date format is 8Bits, even, 1 stop bit (8 E 1). The RS-485 is disabled when the DVP04TC-E2 is connected in series to an MPU, LED indication, Plugin termination For PLC: ES/EX.

 
 Delta 
Mod,DVP04TC-S 4x Tcouple IP module  Mod,DVP04TC-S 4x Tcouple IP module

4x J&K thermocouple inputs module. DegC and Fahrenheit, Vsupply=20.4VDC to 28.8VDC Temperature Input Range J-type: -100°C~700°C K-type: -100°C~1000°C J-type: -148°F~1292°F K-type: -148°F~1832°F Digital Conversion Range J-type: K-1000~K7000 K-type: K-1000~K10000 J-type: K-3280~K12920 K-type: K-1480~K18320 Resolution = 14 bits(0.1°C) 14 bits(0.18°F) Overall Accuracy =±0.5% of full scale of 25°C(77°F), ±1% of full scale during 0~55°C(32~131°F) Response Time 250 ms ×channels No isolation between channels. Digital Data Format 2’s complement of 16-bit, (13 Significant Bits) Average Function Yes (CR#2~CR#5 may be set and the range is K1~K4096) Self Diagnostic Function = Yes Communication Mode (RS-485) MODBUS ASCII/RTU Mode. Communication baud rate of 4800 / 9600 / 19200 / 38400 / 57600 / 115200. For ASCII mode, date format is 7Bits, even, 1 stop bit (7 E 1). For RTU mode, date format is 8Bits, even, 1 stop bit (8 E 1). The RS-485 is disabled when the DVP04TC-S is connected in series to an MPU.

 
 Delta 
Mod,DVP06AD-S 6xIP V/mA analog IP module  Mod,DVP06AD-S 6xIP V/mA analog IP module

DVP06AD-S has 6 x analog signal inputs (±10Vdc - resolution 1.25mV/14bits) OR current(±20 mA - resolution is 5 µA/13bits), Supply:20.4VDC to 28.8VDC Accuracy:=±0.5% of full scale of 25DegC(77Fahr); ±1% of full scale during 0-55℃(32~131Fahr). For DVP-PLC SS/SA/SX Series PLC There are 49 CR(Control Register, each register has 16-bit) in each module. Firmware version update via RS485.Wiring selectable voltage or current.

 
 Delta 
Mod,DVP06SN11R OP module  Mod,DVP06SN11R OP module

DVP06SN11R -6x Relay output module, 250V/6A,30Vdc max Max load 240VA(Inductive), 150W(resistive)

 
 Delta 
Mod,DVP06XA-S 4xIP,2xOP V/mA analog module  Mod,DVP06XA-S 4xIP,2xOP V/mA analog module

The DVP06XA-S -4 x +-mA/V analog inputs and 2 x +mA/V outputs, Supply:20.4VDC to 28.8VDC Inputs: Voltage +-10Vdc(resolution is 5 mV/14bit) OR +-Current +-0-20mA(resolution is 20 µA/13bit) Outputs: Voltage +0-10Vdc (resolution is 2.5 mV) and current is +0mA-20mA(resolution is 5 µA). There are 49 Registers (CR, each register has 16-bit) in each module. Firmware can be updated via RS485. Select bewtween voltage or current via wiring.

 
 Delta 
Mod,DVP08SM11N IP module  Mod,DVP08SM11N IP module

VDP08SM11N -8xDig Sink/source IP module, 24Vdc/5mA, Input Type DC SINK/SOURCE, Input 24Vdc/ON=5mA, OFF=2mA State On>16VDC,Off<14.4VDC Response Time Adj.0 to 15ms Transition ON=15us /OFF=20us Isolation=Optocoupler, LED indication,

 
 Delta 
Mod,DVP08SN11R OP module  Mod,DVP08SN11R OP module

DVP08SN11R -8x Relay output module, 250V/1.5A,30Vdc max Max load 75V(Inductive), 90W(resistive)

 
 Delta 
Mod,DVP08SN11T NPN OP module  Mod,DVP08SN11T NPN OP module

DVP08SN11T -8x NPN Transistor output module, 30Vdc/0.1A Max load 9W Transition ON=15usec, OFF=25usec

 
 Delta 
Mod,DVP08SP11R 4IN/4OUT module  Mod,DVP08SP11R 4IN/4OUT module

DVP08SP11R 24Vdc supply INPUT: 4xDIN inputs Type DC SINK/SOURCE, 24Vdc/ON=5mA, OFF=2mA State On>16VDC,Off<14.4VDC Response Time Adj.0 to 15ms Transition ON=15us /OFF=20us Isolation=Optocoupler, LED indication, OUTPUT: -4x Relay output module, Status LED indication. 250V/1.5A,30Vdc max Max load 75V(Inductive), 90W(resistive)

 
 Delta 
Mod,DVP08SP11T 4IN/4OUT module  Mod,DVP08SP11T 4IN/4OUT module

DVP08SP11T -4xDIN, 4relay outputs INPUT: Type DC SINK/SOURCE, 24Vdc/ON=5mA, OFF=2mA State On>16VDC,Off<14.4VDC Response Time Adj.0 to 15ms Transition ON=15us /OFF=20us Isolation=Optocoupler, LED indication, OUTPUT: 16x Transistor output module, 30Vdc/0.1A Max load 9W Transition ON=15usec, OFF=25usec

 
 Delta 
Mod,DVP08XM211N DIG IP module  Mod,DVP08XM211N DIG IP module

DVP08XM211N -8xDig Sink/source Digital Input module, 24Vdc/5mA(internally supplied) Input Type DC SINK/SOURCE, Input 24Vdc/ON=5mA, OFF=2mA State On>16VDC,Off<14.4VDC Response Time Adj.0 to 15ms Transition ON=15us /OFF=20us Isolation=Optocoupler, LED indication, For PLC: ES/EX.

 
 Delta 
Mod,DVP08XN211R 8xRelay OP module  Mod,DVP08XN211R 8xRelay OP module

DVP08XN211R -8x Relay output module, 250V/2A,30Vdc max Max load 75VA(Inductive), 90W(resistive) Reaction time=10ms, Plugin termination LED indication, For PLC: ES/EX.

 
 Delta 
Mod,DVP08XP211R 4IN/4Output module  Mod,DVP08XP211R 4IN/4Output module

DVP08XP211R -4xDIN, 4relay outputs INPUT: Type DC SINK/SOURCE, 24Vdc/ON=5mA, OFF=2mA State On>16VDC,Off<14.4VDC Response Time Adj.0 to 15ms Transition ON=15us /OFF=20us Isolation=Optocoupler, LED indication, OUTPUT: 8x Relay outputs, 250Vac/2A Max load 75VA(Inductive), 90W(resistive) Reaction time=10ms, LED indication, Plugin termination For PLC: ES/EX.

 
 Delta