Instrument Converters / conditioners / transducers / Splitters - ElectroSource
Instrument V&I monitors, Converters / conditioners / transducers

Instrument V&I monitors, Converters / conditioners / transducers

Product Attributes
                                                                                                   
Number of attributes100
Show: 
gary test1
 Image   Products+   Manufacturer 
Conv,IFD6500 - USB-RS485 converter  Conv,IFD6500 - USB-RS485 converter

USB/RS-485 converter. Ne xetrenal power req, Auto detect dataflow direction, Portable

 
 Delta 
Conv,IFD6503 - USB-Can converter  Conv,IFD6503 - USB-Can converter

USB/Can converter. Extract Can message in std. and extended frames, decodes and dispalys following D/net and CanOpen prot. Filter, Sends Can messages (1 message manual, 8 messages auto, 1Mbps, portable

 
 Delta 
Conv,IFD8520 - RS232-RS422/485 addressable isolated converter  Conv,IFD8520 - RS232-RS422/485 addressable isolated converter

RS232/RS-422/485 addressable isolated converter, Set by modbus address.

 
 Delta 
Conv,IFD9502 - Devicenet to modbus converter  Conv,IFD9502 - Devicenet to modbus converter

Devicenet compliant, Isolated RS.485

 
 Delta 
Conv,IFD9503 - CanOpen to Modbus converter  Conv,IFD9503 - CanOpen to Modbus converter

RS232/RS-422/485 addressable isolated converter, Set by modbus address.

 
 Delta 
Conv,IFD9506 - ModBus TCP to Modbus converter  Conv,IFD9506 - ModBus TCP to Modbus converter

Isolated RS 485, Webpage setup and online monitoring, Serial virtual comm setup, Email alarm.

 
 Delta 
Conv,IFD9507 - EtherNet/IP to ModBus converter  Conv,IFD9507 - EtherNet/IP to ModBus converter

Isolated RS 485, Webpage setup and online monitoring, Serial virtual comm setup, Email alarm.

 
 Delta 
IFD6530 - USB-RS485 converter  IFD6530 - USB-RS485 converter

USB/RS-485 converter, +9V supply for keypad KPC-CC01 for c2000 drive, Parmeter and page editing, 115Kps, No ext . PS req, Auto detect data direction, Portable

 
 Delta 
IFD6530 - USB-RS485 converter  IFD6530 - USB-RS485 converter

USB/RS-485 converter, +9V supply for keypad KPC-CC01 for c2000 drive, Parmeter and page editing, 115Kps, No ext . PS req, Auto detect data direction, Portable

 
 Delta 
IFD8500 - RS232-RS422/485 isolated converter  IFD8500 - RS232-RS422/485 isolated converter

RS232/RS-422/485 isolated converter

 
 Delta 
mAmon,D3 LM(0/1/2) (-T)  mAmon,D3 LM(0/1/2) (-T)

D3-LM0/1/2 -: 0 / 4 to 20mA LOOP monitor, 4Digit - 2off 7segment displays, DIN mount. Adjustable window can be set(Hi/Lo) in which relay will energise. Hi and Lo hysterises setpoints. Each fault condition can be disabled. Input is scalable(1500) and decimal point up to 3 places. Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. (100sec) Adjustable reaction delay per relay- The trip delay time after the fault has occured(100sec). Relay invert status functionality. Can latch one or both relays. Terminal reset. Input signal damping. 4-20mA output for -T models. (0-10V on special request) The 4 -20mA transmitted signal is optically isolated from the input signal The 4 -20mA can be inverted (decreases when input signal increase and vice versa). Onboard 24Vdc /30mA power supply for version -P. Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout(only setpoint can be changed) + Code protection. Factory default reset

 
 Icon Electronics 
mAmon,D3 LM(0/1/2) (-T)  mAmon,D3 LM(0/1/2) (-T)

D3-LM0/1/2 -: 0 / 4 to 20mA LOOP monitor, 4Digit - 2off 7segment displays, DIN mount. Adjustable window can be set(Hi/Lo) in which relay will energise. Hi and Lo hysterises setpoints. Each fault condition can be disabled. Input is scalable(1500) and decimal point up to 3 places. Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. (100sec) Adjustable reaction delay per relay- The trip delay time after the fault has occured(100sec). Relay invert status functionality. Can latch one or both relays. Terminal reset. Input signal damping. 4-20mA output for -T models. (0-10V on special request) The 4 -20mA transmitted signal is optically isolated from the input signal The 4 -20mA can be inverted (decreases when input signal increase and vice versa). Onboard 24Vdc /30mA power supply for version -P. Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout(only setpoint can be changed) + Code protection. Factory default reset

 
 Icon Electronics 
mAmon,P44 LM(0/1/2) (-T)  mAmon,P44 LM(0/1/2) (-T)

P44-LM0/1/2 -: 0 / 4 to 20mA LOOP monitor, 4Digit - 2off 7segment displays, 48 x48 Panelmount. Adjustable window can be set(Hi/Lo) in which relay will energise. Hi and Lo hysterises setpoints. Each fault condition can be disabled. Input is scalable(1500) and decimal point up to 3 places. Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. (100sec) Adjustable reaction delay per relay- The trip delay time after the fault has occured(100sec). Relay invert status functionality. Can latch one or both relays. Terminal reset. Input signal damping. 4-20mA output for -T models. (0-10V on special request) The 4 -20mA transmitted signal is optically isolated from the input signal The 4 -20mA can be inverted (decreases when input signal increase and vice versa). Onboard 24Vdc /30mA power supply for version -P. Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout(Only setpoint can be changed) + Code protection. Factory default reset

 
 Icon Electronics 
mAmon,P44 LM(0/1/2) (-T)  mAmon,P44 LM(0/1/2) (-T)

P44-LM0/1/2 -: 0 / 4 to 20mA LOOP monitor, 4Digit - 2off 7segment displays, 48 x48 Panelmount. Adjustable window can be set(Hi/Lo) in which relay will energise. Hi and Lo hysterises setpoints. Each fault condition can be disabled. Input is scalable(1500) and decimal point up to 3 places. Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. (100sec) Adjustable reaction delay per relay- The trip delay time after the fault has occured(100sec). Relay invert status functionality. Can latch one or both relays. Terminal reset. Input signal damping. 4-20mA output for -T models. (0-10V on special request) The 4 -20mA transmitted signal is optically isolated from the input signal The 4 -20mA can be inverted (decreases when input signal increase and vice versa). Onboard 24Vdc /30mA power supply for version -P. Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout(Only setpoint can be changed) + Code protection. Factory default reset

 
 Icon Electronics 
mAmon,P49 LM(0/1/2) (-T)  mAmon,P49 LM(0/1/2) (-T)

P49-LM0/1/2 -: 0 / 4 to 20mA LOOP monitor, 4Digit - 1off 7segment display, 96x48 Panelmount. Adjustable window can be set(Hi/Lo) in which relay will energise. Hi and Lo hysterises setpoints. Each fault condition can be disabled. Input is scalable(1500) and decimal point up to 3 places. Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. (100sec) Adjustable reaction delay per relay- The trip delay time after the fault has occured(100sec). Relay invert status functionality. Can latch one or both relays. Terminal reset. Input signal damping. 4-20mA output for -T models. (0-10V on special request) The 4 -20mA transmitted signal is optically isolated from the input signal The 4 -20mA can be inverted (decreases when input signal increase and vice versa). Onboard 24Vdc /30mA power supply for version -P. Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout(only setpoint can be changed) + Code protection. Factory default reset

 
 Icon Electronics 
mAmon,P49 LM(0/1/2) (-T)  mAmon,P49 LM(0/1/2) (-T)

P49-LM0/1/2 -: 0 / 4 to 20mA LOOP monitor, 4Digit - 1off 7segment display, 96x48 Panelmount. Adjustable window can be set(Hi/Lo) in which relay will energise. Hi and Lo hysterises setpoints. Each fault condition can be disabled. Input is scalable(1500) and decimal point up to 3 places. Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. (100sec) Adjustable reaction delay per relay- The trip delay time after the fault has occured(100sec). Relay invert status functionality. Can latch one or both relays. Terminal reset. Input signal damping. 4-20mA output for -T models. (0-10V on special request) The 4 -20mA transmitted signal is optically isolated from the input signal The 4 -20mA can be inverted (decreases when input signal increase and vice versa). Onboard 24Vdc /30mA power supply for version -P. Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout(only setpoint can be changed) + Code protection. Factory default reset

 
 Icon Electronics 
mVmon,D3-CMD0/1/2 (-T)  mVmon,D3-CMD0/1/2 (-T)

D3-CMD0/1/2 (-T)-: DC 50mV (Shunt) Voltage monitor, 4Digit - 2off 7segment displays, 35mm DIN module. Adjustable window can be set(Hi/Lo) in which each relay will energise. Hi and Lo hysterises setpoints. Input is scalable(1500) and up to 3 decimal places. Input signal damping Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. Adjustable reaction delay per relay- The trip delay time after the fault has occured. Relay invert status functionality. Can latch one or both relays. 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout + Code protection. Factory default reset

 
 Icon Electronics 
mVmon,D3-CMD0/1/2 (-T)  mVmon,D3-CMD0/1/2 (-T)

D3-CMD0/1/2 (-T)-: DC 50mV (Shunt) Voltage monitor, 4Digit - 2off 7segment displays, 35mm DIN module. Adjustable window can be set(Hi/Lo) in which each relay will energise. Hi and Lo hysterises setpoints. Input is scalable(1500) and up to 3 decimal places. Input signal damping Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. Adjustable reaction delay per relay- The trip delay time after the fault has occured. Relay invert status functionality. Can latch one or both relays. 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout + Code protection. Factory default reset

 
 Icon Electronics 
mVmon,P44-CMD0/1/2 (-T)  mVmon,P44-CMD0/1/2 (-T)

P44-CMD0/1/2 (-T)-: DC 50mV (Shunt) Voltage monitor, 4Digit - 1off 7segment displays, 48x48 Panelmount. Adjustable window can be set(Hi/Lo) in which each relay will energise. Hi and Lo hysterises setpoints. Input is scalable(1500) and up to 3 decimal places. Input signal damping Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. Adjustable reaction delay per relay- The trip delay time after the fault has occured. Relay invert status functionality. Can latch one or both relays. 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout + Code protection. Factory default reset

 
 Icon Electronics 
mVmon,P44-CMD0/1/2 (-T)  mVmon,P44-CMD0/1/2 (-T)

P44-CMD0/1/2 (-T)-: DC 50mV (Shunt) Voltage monitor, 4Digit - 1off 7segment displays, 48x48 Panelmount. Adjustable window can be set(Hi/Lo) in which each relay will energise. Hi and Lo hysterises setpoints. Input is scalable(1500) and up to 3 decimal places. Input signal damping Each relay can be set with own trip conditions. Adjustable startup delay per relay- Fault monitoring disbabled for this time after power on. Adjustable reaction delay per relay- The trip delay time after the fault has occured. Relay invert status functionality. Can latch one or both relays. 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Records Max/Min values in the last 24Hrs - updated every 60minutes. Security: Complete lockout or partial lockout + Code protection. Factory default reset

 
 Icon Electronics