Ammeters - ElectroSource
Mains Ammeters

Mains Ammeters

Product Attributes
                                                                                                   
Number of attributes100
Show: 
gary test1
 Image   Products+   Manufacturer 
Ammeter,LA5/1 - 5Amp Hi/Lo current monitor  Ammeter,LA5/1 - 5Amp Hi/Lo current monitor

LA5/P:- 1-5Amp UNDER CURRENT, 1phase AC current monitor. Adjustable setpoint and reponse delay.Reset button, 11pin plug in relay, 1x SPDT relay. One 1amp CT for input. Preset 5% hysteresis. *During timing period the power LED flashes. 10 sec power up delay - Does not monitor fault for first 10 seconds after power up. Adjustable 0.5 - 30minutes response delay. Under current:- Current lower then the setpoint will de-energise relay. The relay will only energise again if the voltage has risen by the hysteresis amount. Button reset on faceplate or cycle power.

 
 ElectroDev 
Ammeter,LA5/1P - 1Amp lo current monitor  Ammeter,LA5/1P - 1Amp lo current monitor

LA5/P:- 5Amp UNDER CURRENT, 1phase AC current monitor. Adjustable setpoint and reponse delay.Reset button, 11pin plug in relay, 1x SPDT relay. One 1amp CT for input. Preset 5% hysteresis. *During timing period the power LED flashes. 10 sec power up delay - Does not monitor fault for first 10 seconds after power up. Adjustable 0.5 - 30minutes response delay. Under current:- Current lower then the setpoint will de-energise relay. The relay will only energise again if the current has risen by the hysteresis amount. Button reset on faceplate or cycle power.

 
 ElectroDev 
Ammeter,LA5/5 - 1Amp Hi/Lo current monitor  Ammeter,LA5/5 - 1Amp Hi/Lo current monitor

LA5/P:- 1-5Amp UNDER CURRENT, 1phase AC current monitor. Adjustable setpoint and reponse delay.Reset button, 11pin plug in relay, 1x SPDT relay. One 5amp CT for input. Preset 5% hysteresis. *During timing period the power LED flashes. 10 sec power up delay - Does not monitor fault for first 10 seconds after power up. Adjustable 0.5 - 30minutes response delay. Under current:- Current lower then the setpoint will de-energise relay. The relay will only energise again if the voltage has risen by the hysteresis amount. Button reset on faceplate or cycle power.

 
 ElectroDev 
Ammeter,LA5/5P - 5Amp current monitor  Ammeter,LA5/5P - 5Amp current monitor

LA5/P:- 1-5Amp UNDER CURRENT, 1phase AC current monitor. Adjustable setpoint and reponse delay.Reset button, 11pin plug in relay, 1x SPDT relay. One 5amp CT for input. Preset 5% hysteresis. *During timing period the power LED flashes. 10 sec power up delay - Does not monitor fault for first 10 seconds after power up. Adjustable 0.5 - 30minutes response delay. Under current:- Current lower then the setpoint will de-energise relay. The relay will only energise again if the voltage has risen by the hysteresis amount. Button reset on faceplate or cycle power.

 
 ElectroDev 
Ammeter,WA5/1: 1Amp AC current window monitor  Ammeter,WA5/1: 1Amp AC current window monitor

WA5:- 0-5Amp window current monitor, 1phase AC current monitor. Adjustable High and Low trip setpoints.Latch, 11pin module,1x SPDT relay. One 1amp CT for input. Preset 5% hysteresis. 10 sec power up delay - Does not monitor fault for first 10 seconds after power up. 2 modes of operation: 1.Relay activated as long as the current is between the High and Low setpoints. If tripped relay energises again if current changed by more than hysterises (5%) into window parameters -Unless latched off used. 2. Relay de-energised whilst current level between window setpoints. If tripped relay de-energises again if current changed by more than hysterises (5%) into window parameters -Unless latched off used. Latch function- Terminal reset.

 
 ElectroDev 
Ammeter,WA5/5: 5Amp AC current window monitor  Ammeter,WA5/5: 5Amp AC current window monitor

WA5:- 0-5Amp window current monitor, 1phase AC current monitor. Adjustable High and Low trip setpoints.Latch, 11pin module,1x SPDT relay. One 5amp CT for input. Preset 5% hysteresis. 10 sec power up delay - Does not monitor fault for first 10 seconds after power up. 2 modes of operation: 1.Relay activated as long as the current is between the High and Low setpoints. If tripped relay energises again if current changed by more than hysterises (5%) into window parameters -Unless latched off used. 2. Relay de-energised whilst current level between window setpoints. If tripped relay de-energises again if current changed by more than hysterises (5%) into window parameters -Unless latched off used. Latch function- Terminal reset.

 
 ElectroDev 
Meter,D3-CMA0/1/2-1 (-T)  Meter,D3-CMA0/1/2-1 (-T)

D3-CMA0/1/2-1 (-T): AC current 0-1A (Current transfomers) monitor, 4Digit - 2off 7segment displays, DIN module. Input is scalable from 5 to 5000 and decimal point up to 3 places. Each relay can be set with own trip setpoints. Adjustable Over/Under and common hysterisis trip setpoints,Each of these fault conditions can be disabled. Front panel calibration +-10% up Adjustable startup delay- Fault monitoring disbabled for this time after power on.(100sec) Adjustable reaction delay- The trip delay time after the fault has occured.(100sec) Latch facility 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Security: Complete lockout or partial lockout.+ code protect Factory default reset

 
 Icon Electronics 
Meter,D3-CMA0/1/2-5 (-T)  Meter,D3-CMA0/1/2-5 (-T)

D3-CMA0/1/2-5 (-T): AC current 0-5A (Current transfomers) monitor, 4Digit - 2off 7segment displays, DIN module. Input is scalable from 5 to 5000 and decimal point up to 3 places. Each relay can be set with own trip setpoints. Adjustable Over/Under and common hysterisis trip setpoints,Each of these fault conditions can be disabled. Front panel calibration +-10% up Adjustable startup delay- Fault monitoring disbabled for this time after power on.(100sec) Adjustable reaction delay- The trip delay time after the fault has occured.(100sec) Latch facility 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Security: Complete lockout or partial lockout.+ code protect Factory default reset

 
 Icon Electronics 
Meter,P44-CMA0/1/2-1 (-T)  Meter,P44-CMA0/1/2-1 (-T)

P44-CMA0/1/2-1 (-T): AC current 0-1A (Current transfomers) monitor, 4Digit - 1off 7segment display, 48x48mm panelmount. Input is scalable from 5 to 5000 and decimal point up to 3 places. Each relay can be set with own trip setpoints. Adjustable Over/Under and common hysterisis trip setpoints,Each of these fault conditions can be disabled. Front panel calibration +-10% up Adjustable startup delay- Fault monitoring disbabled for this time after power on.(100sec) Adjustable reaction delay- The trip delay time after the fault has occured.(100sec) Latch facility 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Security: Complete lockout or partial lockout.+ code protect Factory default reset

 
 Icon Electronics 
Meter,P44-CMA0/1/2-5 (-T)  Meter,P44-CMA0/1/2-5 (-T)

P44-CMA0/1/2-5 (-T): AC current 0-5A (Current transfomers) monitor, 4Digit - 1off 7segment display, 48x48mm panelmount. Input is scalable from 5 to 5000 and decimal point up to 3 places. Each relay can be set with own trip setpoints. Adjustable Over/Under and common hysterisis trip setpoints,Each of these fault conditions can be disabled. Front panel calibration +-10% up Adjustable startup delay- Fault monitoring disbabled for this time after power on.(100sec) Adjustable reaction delay- The trip delay time after the fault has occured.(100sec) Latch facility 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Security: Complete lockout or partial lockout.+ code protect Factory default reset

 
 Icon Electronics 
Meter,P49-CMA0/1/2-1 (-T)  Meter,P49-CMA0/1/2-1 (-T)

P49-CMA0/1/2-1 (-T): AC current 0-1A (Current transfomers) monitor, 4Digit - 1off 7segment display, 96x48mm panelmount. Input is scalable from 5 to 5000 and decimal point up to 3 places. Each relay can be set with own trip setpoints. Adjustable Over/Under and common hysterisis trip setpoints,Each of these fault conditions can be disabled. Front panel calibration +-10% up Adjustable startup delay- Fault monitoring disbabled for this time after power on.(100sec) Adjustable reaction delay- The trip delay time after the fault has occured.(100sec) Latch facility 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Security: Complete lockout or partial lockout.+ code protect Factory default reset

 
 Icon Electronics 
Meter,P49-CMA0/1/2-5 (-T)  Meter,P49-CMA0/1/2-5 (-T)

P49-CMA0/1/2-5 (-T): AC current 0-5A (Current transfomers) monitor, 4Digit - 1off 7segment display, 96x48mm panelmount. Input is scalable from 5 to 5000 and decimal point up to 3 places. Each relay can be set with own trip setpoints. Adjustable Over/Under and common hysterisis trip setpoints,Each of these fault conditions can be disabled. Front panel calibration +-10% up Adjustable startup delay- Fault monitoring disbabled for this time after power on.(100sec) Adjustable reaction delay- The trip delay time after the fault has occured.(100sec) Latch facility 4-20mA output for -T models. (0-10V on special request) Each fault condition is indicated on screen. Security: Complete lockout or partial lockout.+ code protect Factory default reset

 
 Icon Electronics