Float / Level measurement - ElectroSource
Float / Level measurement

Float / Level measurement

Product Attributes
                                                                                                   
Number of attributes100 gary test1
 Image   Products+   Manufacturer 
Level,LV1:- 3Probe conductive liquid level Fill/Empty control  Level,LV1:- 3Probe conductive liquid level Fill/Empty control

LV1 – 2/3probe Liquid level Control. Sensitivity adjustment. 3 Modes of operation:- 1. Emptying :– Making the MAX level contact (The MIN should be made as well) energises the relay. Relay de-energises when MIN opens (MAX should not be made at this time). 2. Filling :– MIN and MAX open energises relay. Relay DE-energises when MAX is made. 3. Single level /Tank full control:- *Permanent short /close Low terminal. Emptying:-The relay operates when high closes. Filling:- The relay de-activates (releases) when high closes.

 
 ElectroDev 
Level,LVC1:- 1/2Level switch ctl,Fill/Empty/Full control, NPN-NO,11pin  Level,LVC1:- 1/2Level switch ctl,Fill/Empty/Full control, NPN-NO,11pin

LVC1 – 2/3probe Liquid level Control. Sensitivity adjustment. 3 Modes of operation:- Filling: Both High/Low probes open the relay is energized. If the level reaches the HIGH probe the relay will de-energize. If the LOW probe opens again the relay will energise. Emptying: Both High/Low probes open the relay is de-energized. If HIGH probe is made the relay will energize and will remain ON until the level falls below the LOW level probe. Single level/Tank full control:- *Permanent short /close Low terminal. Emptying:-The relay operates when high closes. Filling:- The relay de-activates (releases) when high closes. Onboard 24Vdc PSU

 
 ElectroDev